Phrozen’s Aqua 3D Printer Resins are developed to print with speed, producing 3D printed models with high-precision and durable 3D printed parts that do not break easily. Phrozen provides a wide range of resins that can be used for a variety of purposes. Please refer to this link to decide which resin is best suited for your needs. SPECIFICATIONS: Aqua Green Density: 1.12 g / cm3 Viscosity: 125 CPS Tensile Strength (Break): 24 Mpa Elongation: 21% I-Zod Impact Strength: 1.81 KJ/m2 Surface Hardness, Shore D: 86 Shore D Water Contact Angle: 55 degree PRECAUTIONS: Way to Rinse: Clean with alcohol spray with air gun. DO NOT immerse model into alcohol for long time. Use and preserve resins in room temperature, and in dark and ventilated conditions Shake well before each use After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin. Keep resin away from kids and away from direct sunlight exposure Wear gloves and masks during operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins. DO NOT dump resin. Please cure it and treat it as general plastic garbage. After receiving your Phrozen resins, we strongly recommend you finish it as soon as possible as unopened resins only have a shelf life of one year
