Phrozen Nylon-Green Tough 3D Printer Resins are stretchable, withstanding high pressures up to 19 MPa, and do not break easily. These resins are specifically made for prototyping and creating functional 3d printed parts. Phrozen provides a wide range of resins that can be used for a variety of purposes. Please refer to this link to decide which resin is best suited for your needs. SPECS: Viscosity: 742 cps Proportion: 1.1 Tg: 73 °C Elongation: 130% Break Value: 19 MPa Hardness: Shore 68 D I-Zod Impact: 23.79 KJ/m2 XY Resolution: 0.047 mm Layer Height / Parameter: 10 sec @ 50 um, Delay 3 Ways to Rinse: Use alcohol spray to clean models and dry it by an air gun. Do not immerse printed part into alcohol over 30 sec. Compatible Printer: Phrozen 3D Printer Series Application: Prototyping PRECAUTIONS: Way to Rinse: Clean with alcohol spray with air gun. DO NOT immerse model into alcohol for long time. Use and preserve resins in room temperature, and in dark and ventilated conditions Shake well before each use After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin. Keep resin away from kids and away from direct sunlight exposure Wear gloves and masks during operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins. DO NOT dump resin. Please cure it and treat it as general plastic garbage. After receiving your Phrozen resins, we strongly recommend you finish it as soon as possible as unopened resins only have a shelf life of one year
