Bambu Lab A1 mini Plug-N-Play Active Flow Rate Compensation Full Auto Calibration Active Motor Noise Cancelling High Speed Precision Active Flow Rate Compensation The A1 mini revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy. Full Auto Calibration The A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically. Plug-N-Play The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print. Active Motor Noise Cancelling The A1 mini can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise. Bed Slinger, with CoreXY Speed And Quality（High-Speed Precision) Full-metal Rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments. Sync with Bambu Studio and Bambu Handy Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos. A1 mini Tech Specs ItemSpecifications BodyBuild Volume (W x D x H)180×180×180 mm³ ToolheadHot EndAll-Metal ToolheadMax Hot End Temperature300 °C ToolheadNozzleStainless Steel ToolheadNozzle Diameter0.4 mm (included)0.2 mm, 0.6 mm, 0.8 mm HeatbedBuild PlateBambu Textured PEI Plate (Included)Bambu Smooth PEI Plate HeatbedMax Build Plate Temperature80°C SpeedMax Speed of Toolhead500mm/s SpeedMax Acceleration of Toolhead10000mm/s² Supported FilamentIDEALPLA, PETG, TPU, PVA Supported FilamentNOT RECOMMENDEDABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer SensorsMonitoring CameraLow Frame Rate Camera (Up to 1080P) Timelapse Supported SensorsFilament Run Out SensorYES SensorsFilament OdometryYES SensorsPower Loss RecoverYES SensorsFilament Tangle SensorYES Physical DimensionsA1 mini : 347*315*365 mm³ , Package size : 385*430*460 mm³ , Net weight 5.5 kg , Gross weight 8.2 kg
