$48.97
$95
Bambu Lab A1 Combo 1-Clip Quick Swap Nozzle Active Motor Noise Cancelling 256*256*256 mm³ Build Volume Full-auto Calibration Multi-Color Printing Active Flow Rate Compensation Multi-color Printing Introducing the sophisticated and dependable AMS Lite, bringing the world of multi-color 3D printing within reach for all users. Active Flow Rate Compensation Full Auto Calibration Quick Swap Nozzle Active Motor Noise Cancelling Bed Slinger, with CORE XY To effortlessly produce a high-quality Benchy model in just 14 minutes, the Bambu Lab A1 3D printer is made with solid metal rails, a sturdy frames, a nozzle pressure sensor, accelerometers, robust MCU, and an advanced motion control system. Sync with Bambu Studio and Bambu Handy Take charge of your printer remotely with Bambu Studio or Bambu Handy, allowing you to oversee and control it effortlessly. Utilize the integrated camera to capture captivating timelapse videos as an additional feature. What's in the Box A1 COMBO ADD-ONS FREQUENTLY ASKED QUESTIONS Expand When is the expected release date of Bambu Lab A1? Due to the heatbed cable issue, the A1 and A1 Combo release date has been delayed. The estimated time of arrival for the A1 and A1 Combo would be around May or June of this year. Expand What is the maximum print size of the A1? 256 * 256 *256 mm³ Expand What Filaments can A1 Print? 1. Low-temperature filaments such as PLA, PETG, TPU, and support materials for PLA and PETG (Support for PLA, PVA, HIPS, etc.). 2. Conventional high-temperature filaments such as ABS, ASA, PC, PA, PA-CF/GF, PET-CF/GF, PPA-CF/GF, etc. Kind Reminder: The standard nozzle is made of stainless steel. When printing filaments containing hard particles (CF, GF, etc.) such as PLA-CF/GF, PLA Glow-in-the-dark, PETG-CF/GF and PAHT-CF/GF, it is necessary to replace the nozzle with hardened steel to prevent excessive wear. Due to the A1's open-frame design and lower chamber temperature, there is a risk of reduced interlayer strength and increased warping for large-sized models and models with high filling density when using conventional high-temperature filaments such as ABS, ASA, PC, PA, PA-CF/GF, PET-CF/GF, PPA-CF/GF, etc. on the A1. However, these high-temperature filaments can be used on the A1 to print small-sized models with low filling density. The printing results may vary depending on the filaments' dry and wet state, the characteristics of the model itself, printing parameters, and the ambient temperature. Expand Is it OK to enclose the A1? We don't recommend enclosing the A1. Expand Can you use multiple AMS lite units with the A1 for up to 16 color prints? The A1 can only support one AMS lite, which means it can print with a maximum of 4 colors. Expand If I install AMS lite on the beam, will the filament spool slide down, or will it affect the accuracy of vibration compensation? As long as the AMS lite is correctly installed, the filament spool should not slide down, even if the previous two spools have a certain forward tilt angle. Additionally, to avoid affecting the accuracy of vibration compensation, you can add reinforcement to the column.
3D Printers
