Durabak Polyurethane Black Bakkie Liner 1L Colour: Black Size: 1L Finish: TexturedProduct Uses:Ideal to coat load beds and tail lifts of bakkies, trucks and trailers. • Offers protection on 4×4’s. • Creates non-slip walkways, stair edges and ramps. • Creates non-slip areas for wheelchair access, emergency exits, fire escapes and around machinery. • Provide non-slip areas for boats, showers and change room floors.Coverage:• 4m² per litre per coat. Applied in a 2 coat application. Giving an overall coverage of 2m² per litre. • 4L covers approximately 1 short wheel base bakkie.Surface Preperation:• Substrates differ significantly, and so all new applications should be tested first. Ensure all substrates are thoroughly clean, sound, dry and free from any contaminants such as dirt, rust, salt, algae and grease • Steel: Abrade surface lightly and remove any surface rust or mill scale by sanding, wire brushing, with a chipping hammer or sandblasting. Prime with Duram NS5 Metcote Etch Primer as per instructions. • Galvanized Iron: Clean away grease and dirt with Duram NS2 Galvanized Iron Cleaner until a water break-free surface is attained. Rinse well with water and allow to dry. Apply Duram NS6 Galvanized Iron Primer the same day as the surface was prepared to avoid re-contamination and flash rust. • Aluminium: Abrade to fresh metal, clean well using detergent or cleaning solvent such as Duram Xylene. Prime with Duram NS5 Metcote as per instructions within 30 minutes. For applications where pooling of water is expected, a specific waterproof primer for aluminium is required.
