Polymaker PolyMide™ CoPa Filament PolyMide™ is a family of Nylon/polyamide based filaments. Produced with Polymaker’s Warp-Free™ technology, PolyMide™ filaments deliver engineering properties intrinsic to Nylon and ease of printing. PolyMide™ CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance of up to 180˚C. PolyMide™ CoPA features Polymaker's Warp-Free™ technology: Warp-Free™ technology enables the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallization behavior of Nylon, which enables the material to fully release the internal stress before solidification. Printing Properties: Nozzle Temperature: 250˚C – 270˚C Printing Speed: 30mm/s – 50mm/s Bed Temperature: 25˚C – 50˚C Bed Surface: Glass with glue Cooling Fan: OFF Printing conditions may vary with different printers and nozzle diameters Mechanical Properties: Young’s Modulus: 2223 ± 199 Mpa Tensile Strength: 66.2 ± 0.9 Mpa Bending Strength: 97.0 ± 1.1 Mpa Charpy Impact Strength: 9.6 ± 1.4 kJ/m2 Thermal Properties: Glass Transition Temperature: 67˚C Vicat Softening Temperature: 180˚C Melting Temperature: 190˚C Notes: Drying Settings: 80˚C for 12h Recommended Support Materials: PolyDissolve™ S1 Other: It is highly recommended to use the PolyBox™ when printing with PolyMide™ CoPA and to store it in the resealable bag. To ensure a good heat resistance of your printed part it is recommended to anneal your PolyMide™ CoPA 3d printed model. Annealing settings: 70˚C for 2h When used extensively, PolyMide CoPA can be abrasive to brass nozzles. When using PolyMide CoPA, we recommend to switch to a wear resistant nozzle such as hardened steel nozzle. TDS: DOWNLOAD SDS: DOWNLOAD PIS: DOWNLOAD
