Bambu Lab PETG-CF Less clumping and stringing Bambu PETG-CF is improved with a modified formula that specifically addresses the issue of clumping and sticking to nozzle during PETG printing. Premium print surface Carbon fiber brings advanced texture to the print surface, while retaining the shine of PETG itself. Strong XY Performance The addition of carbon fiber also significantly enhances the XY strength of PETG without sacrificing layer bonding. Parameters Comparison Learn more different filaments comparison on Bambu Filament Guide >> PLA-CF PETG-CF Price $44.99 CAD $44.99 CAD Filament Type Carbon Fiber Infill Carbon Fiber Infill Hotend Compatibility Hardened Steel (0.4, 0.6, 0.8 mm) Hardened Steel (0.4, 0.6, 0.8 mm) Build Plate Compatibility Cool Plate, High Temperature Plate, Textured PEI Plate Engineering Plate, High Temperature Plate, Textuerd PEI Plate AMS Compatibility Yes Yes Surface Matte Shiny Print Speed <250 mm/s <200 mm/s Toughness (Impact Strength – XY) 23.2 kJ/m² 41.2 kJ/m² Strength (Bending Strength – XY) 89 MPa 70 MPa Stiffness (Bending Modulus – XY) 3950 MPa 2910 MPa Layer Adhesion (Impact Strength – Z) 7.8 kJ/m² 10.7 kJ/m² Heat Resistant（HDT, 0.45 MPa） 55 °C 74 °C High Flexibility Compared to other carbon fiber materials, Bambu PETG-CF exhibits exceptional toughness and is less prone to fracture under external stress and impact. Accessory Compatibility Recommended Not Recommended Build Plate Engineering Plate, High Temperature Plate or Textured PEI Plate Cool Plate Hotend Hardened Steel Nozzle (0.4 / 0.6 / 0.8 mm) Stainless Steel Nozzle (0.2 / 0.4 mm) Glue Bambu Liquid Glue Glue Stick / PETG-CF Hex Code Table Color Hex Code Display Brick Red #9f332a Violet Purple #583061 Indigo Blue #324585 Malachite Green #16b08e Black #000000 Titan Gray #565656 RFID for Intelligent Printing All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps. Recommended Printing Settings Drying Settings (Blast Drying Oven) 65 °C，8 h Printing and Keeping Container’s Humidity < 20% RH (Sealed, with Desiccant) Nozzle Temperature 240 – 270 °C Bed Temperature (with Glue) 65 – 75 °C Printing Speed < 200 mm/s Physical Properties Density 1.25 g/cm³ Vicat Softening Temperature 85 °C Heat Deflection Temperature 74 °C Melting Temperature 225 °C Melt Index 19.3 ± 2.4 g/10 min Mechanical Properties Tensile Strength 35 ± 5 MPa Breaking Elongation Rate 10.4 ± 0.6 % Bending Modulus 2910 ± 260 MPa Bending Strength 70 ± 5 MPa Impact Strength 41.2 ± 2.6 kJ/m² Printing Tips • Bambu PETG-CF needs proper drying before printing. Drying conditions: 65℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI. • To get stronger Z-adhesion, please set a higher infill density, and do not use an open-frame printer or set too large fan percentages to avoid over cooling. • To get shinier looks, set lower speeds and relatively higher temperatures.
